|
|
ABOUT VINYL
Die-cut:
Our “die-cut” stickers/decals are designed in Adobe Illustrator and other sign making software and are cut with a computer controlled plotter. The design is cut out leaving no background, with all negative space removed.
Premium Vinyl:
We use only premium vinyl that when treated properly will last a long time without fading.
Outside application:
Stickers/Decals are designed and cut for the outside of the window.
To apply decals:
Easy application instructions are included with each decal.
1. Place in position on a clean window with a strip of masking tape along top edge.
2. Fold the decal up and carefully remove paper backing, making sure no part of the decal is left on the paper backing. Hold decal up from glass. Do not let the decal touch the glass until you are ready to smooth it down. YOU ONLY GET ONE CHANCE AT THIS!!
3. Working from the top to the bottom, use overlapping side to side motions with a flat edge of a credit card.
4. Remove masking tape hinge. Slowly remove the transfer tape by pulling it back on itself. Small bubbles can be removed by pricking slightly with a pin and pressing out the air.
Colors:
All die-cut designs are single color decals. Special requests for 2 or more colors email Dream Weaver DeSigns at customerservice@dwde-signs.com. Exact color swatches cannot be shown due to the calibration of each monitor, but colors are very close to sample swatches. If you need an exact color match, we will be happy to mail you a small sample of the requested color.
*White and light colored vinyl show up best on vehicle windows.
|
| |
|
